1.27mm Series 68P Receptacle Headers Connector

Introducing the 1.27mm Series 68P Receptacle Headers Connector, the ultimate connector that will make all your professional dreams come true! This little gem is like the superhero of connectors, with its ability to effortlessly connect wires and make your job a breeze. It's so tiny, it could easily be mistaken for a flea on your desk, but don't be fooled by its size – it packs a punch! With its sleek design and precision engineering, this connector will have all the professionals in awe. So, say goodbye to your connector woes and say hello to the 1.27mm Series 68P Receptacle Headers Connector – your new best friend in the world of connectors!

Shenzhen Antenk Electronics Co., Ltd. promoted a 1.27mm pitch Series 68P Receptacle Headers Straight-Angle Mount Pin Type connector.

Connector selection should pay attention to prevent mis-insertion: There are two aspects to prevent mis-insertion: on the one hand, the connector itself, the connector itself rotates 180 degrees, and the wrong connection causes the signal to be connected incorrectly. At this time, it is necessary to pay attention to selecting the anti-missing connection as much as possible. Or, by adjusting the relative positional relationship of the connectors, the assembly is unique; on the other hand, for the purpose of reducing the material type, several signals use the same connector, and it is possible to insert the A plug into the B plug. It is necessary to pay attention to the fact that if such a situation causes serious consequences, the A and B interfaces must be selected as different types of sockets.

SCSI Connectors  Series：

SPECIFICATIONS
1.Electrical Characteristics:
 1.1 Contact Current rate:0.5A
 1.2 Insulation resistance:500MΩ Min
 1.3 Contact resistance:35mΩMax
 1.4 Dielectric Voltage:500V AC For One Minute
2.Material:
 2.1 Insulator:PBT+30%G/F
 2.2 Contact:C5191-H
 2.3 Board Lock:Brass
 2.4 Bracket:ZINC alloy
3.Finish
 3.1 Bracket:Nickel Plated
 3.2 Contact:Gold Plated On Contact Area,Tin Plated
             On Soldering End,Nickel Under-Plating
 3.3 Board Lock:Tin Plated Over,Nickel Under-Plating
4.Environment:
 Operation Temperature:-55℃ To +85℃