2014 Series 2 00mm Wafer Connector

2014 Series 2.00mm Pitch Wafer Connector

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 100000K/month
• Min. Order: 1000 Bag/Bags

Shenzhen Antenk Electronics Co., Ltd. introduced 2014 series, 2.0mm pitch wire-to-board electronic connectors. 2014 Series Connector Ideal for board-to-board and wire-to-board low-power and signal applications,2014 Series connectors provide a flexible design and cost-saving solutions for a variety of applications....

Contact Now

2.00mm Pitch 90° Wafer Connector DIP Series AW2014R-2xNP

• Brand: Antenk
• Packaging: bag
• Supply Ability: 100000/month
• Min. Order: 1000 Piece/Pieces

1.product introduction A Wire To Board Connectors is an electrical connector that consists of two parts, a plug and a socket.The plug usually has a metal pin or contact point, and the socket has a corresponding jack or contact point, and the circuit is connected and disconnected by inserting and pulling.This Wire To...

Contact Now

2.00mm Pitch 180° Wafer Connector DIP Series AW2014S-2xNP

• Brand: Antenk
• Packaging: Tube packing
• Supply Ability: 100000/month
• Min. Order: 1000 Piece/Pieces

1.product introduction low crosstalk, high anti-interference ability and other characteristics to ensure accurate data transmission.At the same time, the Wire To Board Connectors also provides convenience for the maintenance and upgrade of the equipment, making the equipment more flexible and reliable.With the...

Contact Now

Machined Pin connectors 1.27 mm MPHCR series

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 2000K/month
• Min. Order: 1000 Piece/Pieces

Machined Pin connectors Pitch 1.27 mm connector A board end connector is a connector that has one end fixed to a circuit board. The board end connector can be further divided into DIP (perforated fixed) connector and SMT (small surface) connector, which are soldered to fix the connector. On the board. Mainly used in...

Contact Now

1.27mm Series 68P Receptacle Headers Connector

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 100000K/month
• Min. Order: 1000 Bag/Bags

Shenzhen Antenk Electronics Co., Ltd. promoted a 1.27mm pitch Series 68P Receptacle Headers Straight-Angle Mount Pin Type connector. Connector selection should pay attention to prevent mis-insertion: There are two aspects to prevent mis-insertion: on the one hand, the connector itself, the connector itself rotates 180...

Contact Now

1.27*2.54mm Ejectors header SMT type connectors

• Brand: ANTENK
• Packaging: TRAY PACKING and TUBE PACKING...
• Supply Ability: 100KKPCS/Month
• Min. Order: 1000 Bag/Bags

1.27*2.54mm Ejectors header SMT type connectors SPECIFICATION Current Rating: 1.0Amp Insulation Resistance: 1000MΩ min Contact Resistance:20MΩ max Withstand Voltage:500V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PA6T+30%GF UL 94V-0

Contact Now

1.27*2.54mm Ejectors header 180° Four Row foot type

• Brand: ANTENK
• Packaging: BAG PACKING TRAY PACKING and ...
• Supply Ability: 100KKPCS/Month
• Min. Order: 1000 Bag/Bags

1.27*2.54mm rstraight type Ejector header SPECIFICATION Current Rating: 1.0Amp Insulation Resistance:1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 500V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PA6T+30%GF UL 94V-0

Contact Now

Machined Socket Connectors 2.54 mm:MIFES09 series

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 100000K/month
• Min. Order: 1000 Bag/Bags

Shenzhen Antenk Electronics Co., Ltd. launched a Machined Socket connectors 2.54 mm: MIFES09 series electronic products ustomer Engineering Support Modified and Custom Products Signal Integrity Group Interconnect Processing Group Technical Date Materal: Pin(outer sleeve)Brass,machined CuZn38Pb2 Plating(outer sleeve)...

Contact Now

Machined Socket Connectors 2.0 mm MFHDM Series

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 2000K/month
• Min. Order: 1000 Piece/Pieces

Machined Socket Connectors 2.0 mm MFHDM Series Electronics Specifications: Materal: Pin(outer sleeve)Brass,machined CuZn38Pb2 Plating(outer sleeve) Tin Plated:2m/80μ"Ni,5μm/200μ"Sn Gold Pated:2μm/80μ"Ni,0.8μ"gold Plating(Contact):2μm/80μ"Ni,gold or Tin plated Insuiator:PPS UL94V-0 Cllp(Contact 6...

Contact Now

2.54mm Ejector header with Metal latch

• Brand: ANTENK
• Packaging: BAG PACKING TRAY PACKING and ...
• Supply Ability: 100KKPCS/Month
• Min. Order: 1000 Bag/Bags

2.54mm Ejector header 180° with Metal latch series Dual row type ShenZhen ANTENK Electronics Co.,Ltd was established in 2006 year , our main products are PCB connector , Board to board connector ,wire assembly and X code connecotr ect. we can accept small orders and provide free samples if needed ,we supplys this kind...

Contact Now

Machined Pin Connectors 2.54 mm: MPHES Series

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 2000K/month
• Min. Order: 1000 Piece/Pieces

Machined Pin connectors 2.54 mm: MPHES series electronics Specifications: Materal: Pin(outer sleeve)Brass,machined CuZn38Pb2 Plating(outer sleeve) Tin Plated:2m/80μ"N,5μm/200μ"Sn Gold Pated:2μm/80μ"N,0.8μ"gold Insuiator:PPS UL94V-0 Electrical: Current rating:3AmPs/contact max. Current resistance:≤4mΩ/contact I...

Contact Now

0601 Series 0.60mm Pitch Wire To Board Connector

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 100000K/month
• Min. Order: 1000 Bag/Bags

Shenzhen Antenk Electronics Co., Ltd. launched a 0601 Series wire to board electronic product Our Superiority: 1: Broadest product Stocked selection:150,000 plus, There are new products added every day. 2: Good quality :80% of products have CE ROHS certificate. ISO9001:2008. 3: Low price: we can help you reduce...

Contact Now