MX4.20mm 90°Wafer Connector Series AW4202R-1xNP-XXXX

1.product introduction

 A Wire To Board Connectors is an electrical connector that consists of two parts, a plug and a socket.The plug usually has a metal pin or contact point, and the socket has a corresponding jack or contact point, and the circuit is connected and disconnected by inserting and pulling.It is very important for users to correctly select Wire To Board Connectors products.In recent years, Wire To Board Connectors are moving towards smaller trends.The common wire To board connector pitch for handheld consumer electronic devices is 0.40mm;The stack height of 1.00mm is a small connector.Recently, the Wire To Board Connectors used by major original equipment manufacturers are as low as 0.70 mm, and sometimes even lower.

2.product parameter

 SPECIFICATIONS
·Voltage rating：600V AC.DC
·Current rating：7A,AC,DC
·Withstanding Voltage：1500V AC/minute
·Insulation resistance:1000MΩ min
·Temperature range：-25℃-+85℃
·Contact resistance：20mΩ max 

WAFER
·Part NO：AW4202R-1xNP-XXXX
·Poles:02-06P
·Housing Material：Nylon66 UL94V-2 or UL94V-0
·Pin Material:Brass
·Contact Area Plating：Tin-Plated or Gold-Flash
·Mates With:AH4201 Single Row receptacle
·The Dimension Marked“  ”Must Be Recorded

3.product picture