Main Production Process of Connector

2020-07-25

1. Stamping: the manufacturing process of the connector generally starts from stamping, and passes through the large-scale high-speed stamping machine. The connector (pin and other metal parts) is punched by thin metal belt. One end of the large coil metal belt is sent to the front end of the stamping machine, and the other end is wrapped into the coiling wheel through the hydraulic workbench of the stamping machine. The metal belt is pulled out by the coiling wheel and the products are rolled and punched.

900-1

2. Electroplating: after stamping, it should be sent to electroplating section. At this stage, the electronic contact surface of the connector will be coated with various metal coatings. Similar to the stamping stage of a class of problems, such as distortion, fragmentation or deformation, will also appear in the process of stamping into the electroplating equipment, quality defects are very simple to detect.

3. Injection molding: commonly used in PBT, LCP, PA66. PA6T, PA9T injection molding rubber shell, rubber core. For Example Board to Board,Automotive Connector,Terminal Block Series, Battery Connector , Din41612 Connector , battery holders Series,Male Pin Headers Series,Female Pin Headers Series,Modular Jack RJ45 Series,D-Subminiature Connectors Series,Box Header Connector, IDC Socket Connector , SCSI Connectors Series, Wire to Board Connector, Modular Jack, Terminal Block , Wire Harnesses,Cable Assemblies, I/O Connector Housing and shell, etc.

900-2

4. Assembly: new machine vision system has been widely used because of the continuous requirements of manufacturers to improve production power and product quality and reduce production costs. With the development of various visual systems, people are more and more familiar with the characteristics of this kind of inspection system, and learn to consider the detectability of product quality when planning new products.

900-3

900-5

Shenzhen Antenk Electronics Co., Ltd.

Add:3/F,Building B, No.1 Meng Tuo Li Road,ShaPu village 1,Songgang town,Baoan District, Shenzhen City

Previous: Basic Structure Knowledge of FPC Connector and FFC / FPC Flat Cable Connector Next: Review of Antenk electronic Electronica China Shanghai Exhibition held on July 3-5, 2020