M12 Pcb Mount

2.00mm Pin Header Dual Row Straight Type

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 2000K/month
• Min. Order: 1000 Piece/Pieces

2.00mm pitch Pin Header Dual Row Straight Type connector Specifications： Current Rating: 1.5 Amp Insulation Resistance: 1000M ohms min Contact Resistance: 20M ohms max Dielectric Withstanding: AC500V Operating Temperature: -65°C to +125°C Contact Material: Brass Insulator Material: PA6T,UL 94V-0 Black

Contact Now

2.2X3.0X2.3mm Pin Header Dual Row SMT Type

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 100000K/month
• Min. Order: 1000 Piece/Pieces

2.2X3.0X2.3mm Pin Header Dual Row SMT Type connector Specifications: Current Rating: 3 Amp Insulation Resistance:1000M ohms min Contact Resistance: 20M ohms max Dielectric Withstanding: AC500V Operating Temperature: -65°C to +125°C Contact Material: Brass Insulator Material: PA9T,UL 94V-0 Black

Contact Now

1.27*2.54mm Box Header SMT H=5.90 Add Housing Connector

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 100000K/month
• Min. Order: 1000 Bag/Bags

China Guangdong Shenzhen Antenk Electronics Co., Ltd. promoted a 1.27*2.54mm Box Header SMT H=5.90 Add Housing connector. Antenk product inspection manual assembly of various accessories by hand, to remove defective products, the control of the surface effect of the product not only reflects the strict technical...

Contact Now

1.27*2.54mm Right angle Ejectors header connectors

• Brand: ANTENK
• Packaging: BAG PACKING TRAY PACKING and ...
• Supply Ability: 100000K/month
• Min. Order: 1000 Bag/Bags

1.27*2.54mm Right angle Ejectors header connectors SPECIFICATION Current Rating: 1.0Amp Insulation Resistance: 1000MΩ min Contact Resistance:20MΩ max Withstand Voltage: 500V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PA6T+30%GF UL

Contact Now

2.54mm Dual-in-line Socket Straight DIP Connectors

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 2000K/month
• Min. Order: 1000 Bag/Bags

2.54mm Dual-in-line Socket Straight DIP (H=3 L=7.4) connector Specifications: Current Rating: 1.0Amp Contact Resistance:10MΩ max Dielectric Strength: Min 1000 V RMS Mechanical Life: Min 100 cycles Mating Pin: ∅0.40 to %%0.56mm Operating Temperature: -40°C to +105°C Sleeve: Brass CuZn36Pb3(C36000) Contact Clip(4...

Contact Now

2.54MM Ejector header 90° with plastic latch

• Brand: ANTENK
• Packaging: BAG PACKING TRAY PACKING and ...
• Supply Ability: 100KKPCS/Month
• Min. Order: 1000 Bag/Bags

2.54MM Ejector header 90° with plastic latch type Current Rating:1.0Amp Insulation Resistance: 1000MΩ min Contact Resistance:20MΩ max Withstand Voltage: 500V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PA6T+30%GF UL 94V-0

Contact Now

2.54MM Ejector Header SMTtype with Metal Latch

• Brand: ANTENK
• Packaging: BAG PACKING TRAY PACKING and ...
• Supply Ability: 100KKPCS/Month
• Min. Order: 500 Bag/Bags

2.54MM Ejector Header SMTtype with Metal Latch ShenZhen ANTENK Electronics Co.,Ltd was established in 2006 year , our main products are PCB connector , Board to board connector ,Wire to board connector ,wire assembly and X code connecotr ect. we can accept small orders and provide free samples if needed ,we supplys...

Contact Now

Battery Contacts For CR1225A

• Brand: ANTENK
• Packaging: bags, plastic box, tape & reel
• Supply Ability: 100000K/month
• Min. Order: 1000 Piece/Pieces

Product Category: Cylindrical Battery Contacts, Clips, Holders & Springs Product: Battery Clips MAT'L:0.254 TH'K full hard phosphor bronze Battery Cell Size: CR1216, BR1216, CR1220, BR1220, BR1225,CR1225 Number of Batteries: 2 Battery Termination Style: Spring Mounting Style: Clip Termination: surface mount...

Contact Now

Battery Holder AA x 2 PCB Surface Mount

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 100000K/month
• Min. Order: 1000 Bag/Bags

Battery Holder, AA x 2, PCB, Surface Mount Specifications: Battery Sizes Accepted: AA No. of Batteries: 2 Battery Holder Mount: PCB, SMD Base Mat'l:Heat Resistance Nylon(UL94V-0) Contacts Mat'l:0.30THK Stainless Stell, Finish: Gold Flash,over nickel plate Surface mount SMD. 2 AA Battery Holder Dimensions Options of...

Contact Now

CR2016 SMD PCB Mount Cell Battery Socket

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 100000K/month
• Min. Order: 1000 Bag/Bags

Antenk's Coin Cell Holders for CR2016 Batteries Specifications 1.BASE: LCP UL 94V-0 2.CONTACTS:PHOSPHOR BRONZE 3.ELECTRIC: a.CONTACT RESISTANCE:30m OHMS MAX b.INSULATION RESISTANCE:1000M OHMS MIN c.DIELECTNIC VOLTAGE:500V AC ONE SEC LEVEL d.OPERATING TEMPERATURE:-55℃ TO +105℃ CR2016 SMD PCB Mount Cell Battery Socket...

Contact Now

Coin Cell Holders for CR2430 THM

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 100000K/month
• Min. Order: 1000 Bag/Bags

Antenk's CR2430 lithium coin cell Holders DIP/Thru Hole Mount (THM) Specifications 1,Material: a.Housing:PBTVO+GF BK b.Contact:C2680 2,Electric: a.Contact Resistiance:30m ohms Max b.Insulation Resistance:1000M OHMS Min c.Dielectric Voltage:500V AC One Sea Level d.Operating Temperature: -55℃ To 105℃ CR2430 Holder with...

Contact Now

High Current D-SUB 3W3 Solder Cup-Female

• Brand: ANTENK
• Packaging: bags, plastic box
• Supply Ability: 100000K/month
• Min. Order: 1000 Piece/Pieces

Description of Antenk PDB3W3-FXXX High Current D-SUB 3W3 Solder Cup-Female 3W3 D-sub mixed contact connectors from Antenk is a 3W3 Combination D-sub Plug with Tin/Ni or Au finished steel shell, mixed-layout and PBT thermoplastic, 30% glass filled, UL94V-O rated insulator. Solder cup contact termination. Application in...

Contact Now